A Few Things To Know About Penetrating Sealers

A penetrating sealer can be described as a water-based impregnating or penetrating sealer that can work on all kinds of porous surfaces. These are economical products that come with zero sheens. Primers with low viscosity are usually seen to have the maximum amount of penetration when it comes to concrete and other substrate surfaces that are as porous as the same. In case the concrete is hard you can dilute the primer to bring down the levels of viscosity. This makes sure that even a hard and porous surface such as concrete can be penetrated to a significant extent.    
    

Explaining the penetrating sealers further

These days you have various types of penetrating sealer products out there. The most prominent varieties among them are the likes of silicates, siloxanes, silanes, and siliconates. The thing with these is that they are capable of easily penetrating a concrete surface and forming a chemical barrier. This saves the covered surface from the likes of poisonous chemicals as well as moisture. These sealers normally provide protection that is not visible to the naked eye. They do not change the way the covered surface appears. Most of these products happen to be breathable as well.   

This is what lets the moisture vapor escape from these porous surfaces. A penetrating sealer is used the most in outdoor applications. This is because these products are capable of providing the best possible protection even against the harshest of environmental conditions. 

Some features of these sealers

These sealers come with several beneficial features. They offer you excellent protection against stains. You can use them as sealers before grouting. They allow moisture vapour to be transmitted from the surfaces on which they are applied. They have a no-sheen look, which gives them a natural appearance according to the industry experts. You can apply them on the sealed surfaces as well. 

You can be sure that even then a penetrating sealer would not interfere with the slip resistance of the same. They can be used easily, and they last long as well. 

Where do they work the best?

These sealers work well under most circumstances. However, they work best in certain situations. Do you wish to protect your outdoor concrete surfaces from the damage that can happen because of freeze-thaw and corrosion? Do you want to get a matte and natural finish? Do you want invisible protection without leaving any sheen on the surface or changing the way that it appears?

Conclusion

If the answers to all these questions are yes you should be using a penetrating sealer. You can use them easily in walkways and driveways where you need a fair bit of traction. In these cases, the penetrating sealers are a much better option compared to the products that form films. Examples of such materials would be polyurethane and acrylic. The penetrating sealers do not have glossy films. This makes sure that the covered surface does not become a slippery one. There are certain equipment and tools that you should ideally use to apply them such as a high-volume and low-pressure sprayer.