Concrete has become one of the most widely used materials to get a proper and stronghold for your structures. But one of the significant issues that people face is to fix any cracks and repair them properly. Usually, when people see a crack develop on their concrete surface, they call for help from their concrete contractor to get the slab replaced or repaired. This blog will discuss how you can save money by getting an epoxy concrete repair that can be done using a simple and cost-effective epoxy crack injection. While the process may be daunting, we would be covering every step to get that perfect epoxy concrete repair done in the first attempt itself.
Step 1- Eliminate the source:
Before you call for your contractor or think about changing or repairing the concrete slab, check the reason behind why the crack was formed in the first place. As concrete is solid and durable, there needs to be a reason why the crack developed. If your cracks were created due to a heavy impact or improper construction, it would be ideal for changing the concrete slab and replacing it with a new one at the earliest. Some of the most common factors that cause cracks are-
The contractor had incorrectly positioned or failed to put in the expansion joints.
Settling or loss of supporting soils around the edges.
Quality of the concrete that was introduced.
Contraction and expansion from temperature variations.
When you put additional weight on a concrete slab more than its holding capacity.
Concrete on being constantly exposed to dampness.
Step 2- Prepare for the repairs:
Once you have understood the leading cause of the problem, it becomes easier to undertake the repairs so that they do not get cracked again. Using this is one of the best ways to get your cracks repaired. The preparation of a proper epoxy crack mix is a vital step in this case. This is because if the epoxy mix is not prepared correctly, there is a high possibility that you might ruin your repairs. Follow the following steps to get started with the epoxy concrete repairs-
Check out the cracked area and adequately clean the surrounding.
Widen the crack to ensure that the epoxy injection could easily fit in the crack.
Once you have widened the crack as per requirement, use a wire brush to remove excess debris.
Use a pressure washer to clean the area properly.
Allow the area to dry, use a heat gun or blow dryer to help dry up the site faster.
Prepare the mixture when the area dries, and then slowly and safely inject the epoxy into the crack and, by applying high pressure, let it fill till the top.
Let the epoxy dry and ensure no movement in that area for at least a day or two.
Tips for the best results for your epoxy concrete repairs:
While purchasing epoxy, check for the material description and ensure they can be used to seal cracks and gaps.
When cleaning the cracked areas, don’t start directly washing your cracked concrete in a high-pressure setting. Slowly increase your water pressure from steady to high.
Fill the concrete cracks with epoxy using high pressure to spread out and cover the entire damaged area quickly.
Try using a chisel, heat gun or scraper to remove any excess epoxy efficiently.
How will epoxy crack injection help with your concrete repairs?
Most people don’t seem to care for the crack developed on their concrete surface until it gets too late. However, this habit should be avoided because detection and repairs at an earlier stage will cost you much less in your pockets than at a later stage.
Having cracks on your concrete surface leads to unpleasant viewing and faster deterioration of your concrete surface or slab. The advantage of getting an epoxy concrete repair is that-
It helps to increase the lifespan of your concrete slabs and surfaces up to 5-10 years.
It helps your concrete to retain its waterproof and weatherproof capabilities.
It makes your spaces, be it indoors or outdoors, much more elegant and attractive.
It also will help with increasing your property value.
There you have it, all the basics covered to get a DIY epoxy concrete repair using an epoxy crack injection to ensure a long-lasting concrete surface. If you are unsure of a DIY, it would be best to call a professional who will complete your work without any hassle. An expert might also provide you extra warranty and a more durable result as they use better quality materials and equipment for the best results.
Comments
Post a Comment