After learning a lot more about fire, you have finally decided to run a fire safety inspection on a commercial or residential building. Now, the entire process of fire inspection is not a cup of tea as it seems and will handle loads of work. Moreover, you need some specialised tools to cover the same. Therefore, calling up professionals will help you big time in making the right choice.
But, for the layman, creating a checklist of all kinds of the fire inspection to be covered is a good idea. The inspection needs to run at least once annually. The more you end up checking, the higher will be the level of your fire safety. In this given checklist, there will be some sub-checklists too for exploring detailed assessment of areas.
Reviewing the outdoor premises and building accessibility:
The experts associated with fire inspection services will check out the outdoor premises and building accessibility as a major part of their fire services inspection. There are certain interesting spots to cover over here.
The building address must be clearly visible from the street, making it easier for the firefighters to reach you during emergencies.
The exterior access of the building should not be made inaccessible or blocked.
Moreover, there should be an easy connection with the fire department of the locality, just to get their services when you need one.
The lockbox of the building must be easy to find and should have all the necessary keys over there.
It should be easier to point out the fire hydrants and not block them off from the building at all.
The escape and exit routes of the building:
While dealing with fire services inspection, you need to have a close watch towards the exit and escape routes of the building as well. If you are not able to work on it, catch up with the professionals and get their help for the same.
Remember that the exit doors are always easier to access, identify and they should be in working conditions.
Moreover, the fire doors must be all self-closing and latching as people won’t have time to close the door while they leave the building in a hurry during a fire explosion.
The exit doors need to be opened from inside without any special knowledge or keys, as you need smooth access during emergencies.
Now for the electrical systems:
Want to inspect the electrical areas of the building? For that, check in with the best fire safety inspection from the reputed centres and get some advice from their professionals.
Make sure that the electrical receptacles have their own cover plates. The circuits need to be labelled properly on all the given panels.
There needs to be a minimum of 30 inches of access right in front of every electrical panel. For permanent fixtures, there should not be any extension cords used.
Focusing on these fire safety inspection tips will keep you safe when the time comes. You will have enough time to escape from a building when a fire breaks in.
Comments
Post a Comment