Cold rooms are areas where food and beverages can be stored and processed. As a result, a cold room quickly becomes filthy and bacterially polluted. Cold room panels are usually made of metal insulated panels. In this blog post, we'll show you how to clean cold room panels while avoiding damaging the insulated metal panel's surface.
Maintaining the proper temperature in cold storage is one of the most challenging tasks. Mainly used for food, pharmaceuticals, and other perishable products, maintaining a constant temperature are essential for the product's safety. Still, it also helps to keep operating costs down.
Here are some quick tips to ensure that your freezer room panels are operating at peak efficiency:
Maintain The Cleanliness Of Your Condenser Device
To be successful, the condenser device must be kept clear of dust and debris so that complete airflow can be achieved. Since the condenser's job is to extract excess heat from your cold space, it must be kept clean and maintained at all times for optimal efficiency.
Check To See If Your Doors Are Properly Locked
Any problems with the doors or their seals will allow refrigerated air to escape, forcing the cooling systems to work harder to keep the temperature down and increasing operating costs. If you find any cracks or harm to the doors or seals, you can replace them as soon as possible.
Make Sure The Evaporator Coils Are In Good Shape
Evaporator coils use refrigerants to trap heat and lower the temperature of the air. It needs to be able to move air freely to maximize its productivity. Maintain a safe environment at all times.
Keep An Eye On Your Ceiling And Walls
The first warning that something is wrong with your cold storage is discolouration. Since structural damage or cracks may prevent your freezer room panels from functioning correctly, it's essential to get them tested right away. Look for other signs of possible problems, such as mould or rot.
Be Certain You’re Using The Appropriate Lighting
The more energy is needed, the brighter the lights are. Floodlights are commonly used in cold storage, especially warehouses. LED lighting is often used in modern cold storage warehouses to save money.
Keep An Eye On The Temperature
Keeping a close eye on the temperature inside and noting any changes, mainly if they vary significantly from the design temperature. If the temperature change continues, you can contact your refrigeration contractor because there may be a problem with the cooling system.
Make A Timetable For Inspections
A routine inspection and repair schedule is the best way to ensure you don't miss something. Speak with your cold room panel contractors to see if they can assist you in planning and monitoring your system.
Your cold room would be the most effective way to hold your produce at the proper temperature until it works properly. However, ignoring anything that goes wrong can be expensive.
When doing cold-room repairs, it's essential to clean and disinfect the insulated sandwich panel's surface without damaging it.
Unfortunately, most on-duty personnel are not adequately trained. As a result, they can damage the coating, causing oxidation of the freezer room panel.
Comments
Post a Comment