Generally speaking, the sealer is one liquid form of coating, which is applied right on the porous surface of the grout or tile. It helps in protecting tiles from any natural deterioration, oxidation and daily wear. In a typical sense, the sealers will protect the unglazed tiles and grouts from further absorbing stains.
Nowadays, the market houses top-notch quality Penetrating Tile Sealer, which works by increasing the current surface tension to form beading. The main goal of such items is to create hydrophobic water shedding. It means that water will quickly form into its droplet forms on sealed concrete paver surface, and water won’t get soaked right in.
You can get acrylic sealers from the market as well:
While concentrating on sealers, acrylic is one option that you will definitely come across. These are economical and effective option for the task of sealing pavers. They are mainly applied easily and will offer proper colour and gloss enhancement. Remember that solvent-based acrylics are noted to offer more gloss when compared to the water-based counterpart.
However, one downside of such sealers is that they are pretty moisture sensitive. So, the weather conditions need to be optimal while applying this sealer.
Some of the acrylic sealers are also pretty susceptible to scratching.
The solvent-based options are easier to touch-up. Then you have the water-based options, which might be a little bit challenging but can further be used for a touch-up.
Now for the polyurethane or the urethane option:
If you are looking for a sealer, which is a bit towards the expensive side and a bit more difficult to apply than the acrylic version, then polyurethane or urethane is the option to consider.
You can find these options in just a single component or in two components.
It is mandatory to learn that the 2k products can be a little bit tricky for you to mix and will have a limited pot life.
Water-based polyurethane is known to be tougher than acrylic sealers, and they are also more chemical and UV resistant.
But for the non-film forming sealer:
However, if you have one goal to provide that invisible layer of protection right against stains and want to de-ice the salt damage, then a penetrating tile sealer is always the right option for you to move forward with.
As you have probably already known, these penetrating sealers will work out by increasing surface tension.
While these sealers will not offer any sheen or colour enhancement, but you can expect to receive the premium quality of heat, UV and abrasion resistance from this item.
Among all the possible options available, the most common types of penetrating sealers will be siloxanes, silanes and fluoropolymers.
Among the lot, the fluoropolymers are pretty expensive and easy to apply. This is one long-lasting penetrating sealer, which offers premium stain resistance and a higher lifespan when compared to the other options.
So, without wasting any precious time further, you might want to go through all the sealers and then get the best one for your use, as per your preference.
Comments
Post a Comment