If you are planning to include a water feature in your backyard then definitely it is the wise decision that you shall be making. Designer water features can turn your simple looking landscape in a tranquil space which is why many people consider such an option. However, be it a waterfall, pond or the fountain that you install, to maintain it is another challenge. Here are some of the best things you might want to know which can make your job for maintenance a lot easier.
A Skimmer and its Parts
The purpose of the skimmer with regards to designer water features us for many reasons. It helps in sweeping the water surface to make sure the debris stays free.
Debris basket: There is also a debris basket that works as the primary defined within the skimmer. It gathers the twigs, leaves, and even other debris that can often fall inside the water. There is not much time needed to empty the basket of debris. Using such a basket is needed otherwise, the flow of water inside the pond can reduce, and later it can be troublesome.
Filter mat: Another option of the skimmer part is the filter mat which is said to be another stage as well. It is located at the debris basket which is designed for handling any sort of debris that can find its way past the basket. The mat may not require any kind of maintenance as consistently as the basket would.
Pump: Pump is the last and the most important part of a skimmer which can often ensure the water flow is maintained well. Often when the filter screen needs to be cleaned from the bottom, you can understand it as the water flow reduces. At such time pumping is used and the process does not take more than 5 minutes to clean.
Water level
Another best way to maintain your designer water feature is to maintain the level of the water. There are chances of water loss and evaporation which your water feature shall experience. The loss of the water entirely depends on the waterfall height. The amount of water splashing outside the steam length and pond also is important. That is why you might have to add the water on a weekly basis to maintain the level of water. In case you have a pond, the level of the water shall be then monitored with the help of a skimmer mouth which you can use as the reference.
The ideal water needs to be set around 4 inches below the top of the mouth of the skimmer. You can then verify the level of the water every time the debris net gets empty.
Leaks
In case you notice any kind of leaks then it is important that you see if there are any kinds of leaks that are noticeable. This is a common problem that usually happens along the waterfall perimeter and streams. Such leaks can often be because of the ground settling that may result in the water to trickle at the liner edge. You can, however, fix such leaks for which you simply have to put the pack additional soil under the liner.
Comments
Post a Comment