If you have got a property that gets heavy pedestrian or vehicle traffic and you are looking to add concrete car stops, here's a detailed installation guide to help you add them correctly.
What sort of concrete car stops do you need to consider?
Concrete car stops will add protection as well as esthetic appeal to your car park complex. The driver is warned by a car stop over the designated parking area. Car stops in urban areas are strongly recommended to keep parking facilities coordinated and clear of collisions. Car stops fit parking facilities of all kinds, usually; they are used to prevent vehicles from driving through the allocated parking area. They can avoid pedestrian discomfort, and they can also prevent unintended collisions with other cars.
If proper precautions are not taken, parking lots can be particularly unsafe for both vehicles and pedestrians. There are plenty of chances for incidents to happen, from cars driving too close to each other to vehicles pulling forward out of their position instead of back. Luckily there are a few easy steps you can take to make sure it is as safe as possible.
Concrete car stops are certainly among your best defensive lines against incidents at the parking lot. They add to your lot and its visitors' layout, path, and guidance while avoiding any number of potential hazards. And when it comes to making those stops, there is no material more common than concrete.
That's because concrete is highly durable and solid, and it is reinforced with rebar, so concrete car stops are made to last. Not only are they long-lasting, but concrete often appears to be more economical than the alternatives, so painting in the color of your choosing couldn't be simpler.
Installation method
1. First, you will line up the spots for concrete car stops using a fluorescent string to ensure that the line is straight and that the distance between the kerb is consistent across the area.
2. Second, position the car stops between the markings to ensure that the difference between the markings and the kerb lines and the string markings is oriented.
3. Replicate the cycle with the other stops of the car and double-check to see if they are all in order.
4. Use a drill to cut through the rubber to create a car Stop Fixing Point opening to mount the fasteners.
5. Wheel Repair Stop
6. Jackhammer-drilling
7. Finally, put the Fixings in the car Stop and use a Jackhammer to fasten them. Repeat this cycle until the entire car Stops are mounted.
Make sure that every car stop is built with polish and precision so that you and anyone who frequents your lot can have an extra protection measure to protect people and vehicles.
If you are not sure your lot is about the car stop measurements, do not sweat it! You can always contact knowledgeable experts and will be able to advise you on the best stop based on your particular circumstance and give you an overall estimate.
Comments
Post a Comment