If you are a busy person, you definitely will not have a lot of time in your schedule to clean your shower screen. However, you do not have to think about the hard water and soap dirt stains on your glass during what you will be. There are simple ways to help avoid and remove contaminants from your shower door glass to keep it clean and flawless. The best way therefore of doing this is by using shower screen wiper.
Why Does Shower screen Get Dirty?
Hard water is high in mineral deposits such as calcium and magnesium carbonates that appear when water comes into contact with limestone or chalk deposits. When the hard water combines with your soap, it can leave stains on your shower screen called soap powder.
Soap dirt can be toxic to your screen and remove the esthetics in your bathroom. Glass is porous, allowing hard water minerals to soak in the glass over time and cause corrosion. Keeping it clean is the only way to prevent long-lasting or hard-to-remove water spots.
Shower screen Cleaning and Maintenance Tips:
Use Coating Glass:
When you are looking to buy a shower screen door for your bathroom, choose a coating that protects the glass from rough water and soap. Most of the shower door companies will have this option at your fingertips. The type of coating can vary depending on where the shower door company gets its glass. When your shower screen does not have a coating, it will need to be washed more often.
Use the Squeegee:
Many shower screen installers will provide you with a squeegee to make you believe that despite your door glass having a hydrophobic or protective coating, maintenance will still be required. Even if your shower door does not have a coating to avoid the build-up of chemicals, the use of a squeegee can also help prevent water and soap stains. The use of the shower screen wiper keeps the glass clean every day. It's not a time-consuming job, but anyone who uses the shower should be used to it.
Vinegar and Water:
This is a cheap and simple way to keep your shower clean in an environmentally friendly manner. Only blend one part of white vinegar with three parts of distilled water and place it in a spray bottle so that the solution can be stored easily.
Spray the water and vinegar onto the glass and let it sit on the door for up to five minutes if the soap or hard water stain is hard to remove. Spray more solution if it seems to be drying out. Rinse the solution with warm, distilled water or wipe it with a lint-free towel, rag, or paper towel. A newspaper is also a good cleaning material that will not give rise to glass streaks.
Leaving the bathroom door open after a shower will allow air to circulate and aid in the evaporation of water. This will also prevent the build-up of mildew in other areas of the bathroom. When your shower is not adequately ventilated, leave your shower door open to release moisture while not in use. Follow these guidelines, and your shower screen will continue to shine without spots.
Comments
Post a Comment