When you are buying hardwood flooring in Sutherland Shire there are a few things that you need to keep in mind. The first such factor is that of acclimation. It is very important to make sure that the moisture content of the subfloor and the wood are not different from each by more than 2 to 4 percentage points. The moisture content in the subfloor, in fact, should not be more than 12 per cent. If the difference is any higher than what has been said so far you can be sure that you would be facing some serious problems in this regard. If you want to acclimate the material the right way you need to let it get used to the room temperature for 24 hours before it is installed.
This makes sure that the heat is on and already working on the floor a fair amount of time before you get started with the process of installation.
Moisture content:
You may be wondering what the right moisture content should be for your hardwood flooring in Sutherland Shire. Now, you can always ask various manufacturers out there and they would always provide you with their own figures. They would vary a little for sure. However, on average it should be in the range of 6 to 9 per cent. Going by what has been said already if your hardwood floor has a moisture content of 9 per cent and your subfloor has a moisture content of 12 per cent it is still tolerable.
Climate control:
In most cases where you find that people are dissatisfied with the hardwood flooring in Sutherland Shire that they have bought the major reason is surely climate control. It is critical that you maintain your flooring with the right moisture content and temperature. This needs to be done as long as the hardwood stays installed. If climate control is not done properly it would lead to several issues. For example, the material would swell in the summer and shrink in the winter.
Floating floors:
When you are installing hardwood flooring in Sutherland Shire it is important that you leave some breathing space so that it can expand at times when it is supposed to do so. This is a crucial point in the sense that most people tend to miss it. A tree normally expands and contracts at different times in a year. Much in the same way, hardwood floors do the same as well. If you have vertical surfaces you need to leave sufficient space for such contraction and expansion to happen. The amount of space that you need in this regard is directly proportional to the amount of space that you have.
Conclusion:
While installing hardwood flooring in Sutherland Shire it is very important that you get expansion joints. This is especially true when you are installing between rooms. The same is also applicable in the case of large expanses as well as places where a room meets the hall. In these areas, you could use T mouldings as well. This would make sure that your hardwood floor has the space needed to expand and contract.
Comments
Post a Comment