A Few Things To Know About Choosing Ceramic Tiles.

There could be a number of reasons to buy ceramic tiles in Sydney. It could be because you wish to make a backsplash with them. You may want to use them for your floor, on your walls, or even for purposes of decoration. However, there are some factors that you need to keep in mind when it comes to selecting these products. You have to know these so that you are able to choose the right tile for your need. You need to keep in mind that all tiles were not created to be equals.

It is these differences that would determine whether the ceramic tile would hold up for the use that you have determined for it in the first place.

Low Fire Tiles:

There are certain tiles that are also referred to as low fire tiles. These are ones that have only passed through a bisque fire. They tend to be on the cheaper side and are also not as durable as tiles that are high-fired. Even in the case of glazed tiles, there is a good chance that they may have passed through only one firing. In most cases, it is possible that it is rather a low firing that they have passed through.

Do Not Be Fooled By Looks:

This means that you should not choose ceramic tiles just because it looks colourful and attractive. Such tiles are not necessarily as durable as you would like them to be. The high-fired tiles are always much better in this respect. Greenware is a kind of ceramic tiles that have been dried but not fired. They can also be glazed with a low fire glaze and fired to a temperature that is comparatively low.

Usability:

You need to keep in mind that such tiles would not be applicable for a number of uses.

For example, if you are looking for ceramic tile products to build a backsplash, tabletop, or countertop you would need one that is highly durable. It should be one that can be cleaned on a frequent basis. In case they are used to make a tabletop or a countertop they should be good enough to handle hard use as well. The most suitable kind of ceramic tiles, in this case, is Stoneware clay. These are normally fired to around 2200 degrees and this is why they are as strong as they happen to be.

Conclusion:

However, when you are inquiring about these ceramic tiles your questions should not only be limited to the material that was used to make the products in question. Glazes tend to vary and enormously so. In fact, these days you get food-safe glazes as well. However, even among these, there are ones that are not capable of dealing well with chemicals and stains. This is the reason why they tend to lose their colour as well. Quite often there are poorly made tiles as well that will not be able to perform the function that they were built to perform.