If you are into DIY work, then you would be more than familiar with masking tape; chances are that it is highly likely that you would already have used masking tape for some of your current projects. You should know that at times a masking tape may not be as effective as you had hoped but it is often dependent on other conditions as well. That’s why you may want to read the current article, to learn more about masking tape and how to use it effectively.
Clean moldings: If you are planning to apply masking tape on the wall, then you need to first clean the surface of any molding as well as any dirt or dust. Obviously, the masking tape won’t stay put for long, if you apply the same on a dusty surface. All you need to do is to take a damp rag and clean up the required area before applying the masking tape to the same. And if the surface is a little greasy, then you may have to apply a light detergent to wash and clean up the surface, before you apply the tape.
Tape applicator: Sure, you can purchase a roll of masking tape and use it as required. But an easier way of using one is with a tape applicator. You may want to ask or a roll of masking tape that comes with an applicator. All that’s required on your part is to roll out the tape, guide the applicator along until you have the required length you needed in the first place. Make sure that the applicator comes with a built-in cutter which should make it easy for you to cut the tape at the desired length.
Apply pressure: When you use masking tape on any surface, always apply pressure to ensure that the tape forms a firm bond with the surface. Otherwise, dust, as well as other particulates, could get into the gap between the surface and the tape, and this could cause the adhesive to become less effective.
Painting: It is not unknown for painters to use masking tape to mark the boundaries as they paint the wall. So, if you are planning to use the tape, for painting the walls, then you need to allow for the paint to dry before you attempt to remove the masking tape from the wall. Do note that if you attempt to pull off the tape right way, it can cause the paint to smear along the wall or even come off. That is why you need to be patient until the paint is dry before you attempt to pull off the masking tape.
Choose the right product: And like many other products, masking tape comes in various shapes and sizes. You need to decide which ones to go for; remember that it also depends on what you need the masking tape for. Do ask the shopkeeper for more information and select the right one for your residence.
Comments
Post a Comment