Once you install a hardwood flooring in Sydney, the next thing that you are concerned about is the ways to maintain hardwood flooring. The answer can be really perplexing as there is no better way to clean the hardwood floors. The best way for cleaning the hardwood flooring entirely depends on the age of the floor and the type of finish the floor has. In case you don’t know what type of finish your hardwood flooring has, then you must find it now.
How to protect the hardwood flooring from dirt and grime?
The simplest method to protect the hardwood timber flooring in Sydney is to place mats near the entry doors. This way, you can reduce the cleaning time of the hardwood floors. In fact, it is better to place the mats both inside and outside of the exterior doors to decrease tracked-in dirt. Often tiny particles like dirt work as sandpaper and can scratch the wood. By placing the entryway and by entering to the home while wiping the feet, it is possible to keep the hardwood flooring in Sydney from dirt and grime. In case of rainy or snowy weather, you should include a shoe or boot removal area to prevent de-icers and water. Besides, it is also possible to prevent marks by placing floor protectors under furniture. And you can place rugs in the play areas to ensure that the toys of kids don’t scratch the floor.
The next method is to sweep the floor on a regular basis. This is probably the best method to keep the hardwood flooring clean. You can do the sweeping by using a microfiber cloth or the best quality broom. But if you find sweeping is not enough, then pull out the vacuum. Make sure that you vacuum without rotating the beater bar that can scratch the finish of the hardwood floor.
Next thing that you need to do to clean the hardwood timber flooring in Sydney is to clean it by using some cleaning products recommended by the flooring manufacturing company. In a number of cases, not following the recommendation can lead to voiding the warranties. If the flooring of your home were finished on-site, then it is better to talk to the installer for getting product recommendation. If you don’t know any details, then use a generic hardwood floor cleaner from the retail flooring store to clean the floor. But before using the cleaner, test it in an obscure corner like pantry or closet to ensure that you are using the right product. Never use any petroleum or wax based products to clean the floorboard, until it has a wax finish in it.
In case there is any stain or spill on the timber floorboards in Sydney, then wipe it immediately by using a slightly dry or damp soft cloth. Begin from the edges of the spill and then work toward the center. Make sure that you dry the floor properly after cleaning up to prevent damaging the finish of the flooring.
Comments
Post a Comment